Torque Converter: Service and Repair

Torque Converter and Oil Seal

Service Repair No - 44.17.07

Remove

1. Remove automatic gearbox.





2. Remove retaining strap from torque convertor.
3. Fit tool LRT-44-010 to torque converter and remove torque converter from gearbox.
4. Remove tool LRT-44-010 from converter.





5. Remove oil seal from converter housing.

Refit

1. Clean oil seal running surfaces.
2. Lubricate oil seal with transmission fluid.





3. Fit new seal into converter housing using tool LRT-44-001.





4. Fit tool LRT-44-010 to torque converter.
5. Align oil pump drive and fit torque converter to gearbox.
6. Remove tool LRT-44-010 from torque converter.
7. Fit torque converter retaining strap.
8. Fit automatic gearbox.