Bearing - Output Shaft Rear Support

Bearing - Output Shaft Rear Support

Service Repair No - 37.20.55

Disassembly

1. Remove extension housing.





2. Using tool LRT-37-001/2, LRT-37-009 and LRT-37-010, remove output shaft support bearing track.





3. Remove output shaft rear oil seal.





4. Remove output shaft support bearing and oil pick-up ring.

Reassembly

1. Clean output shaft and bearing recess in extension housing.
2. Fit output shaft support bearing and oil pick-up ring. (Align tag with centre of drain slot).





3. Fit new output shaft oil seal using LRT-37-014.





4. Using tool LRT-37-015 and LRT-37-0211, fit support bearing track to output shaft.
5. Fit extension housing.