Operation

Windows - Rear Operation

LH rear window console switch - down
Operation of the LH window console switch in the down position, allows the feed from the rear window lift relay to pass through the up switch contacts to the LH rear window switch on an SW wire. The feed passes through the up switch contacts and is connected to the LH rear window motor on an SO wire.

When the LH window console switch is set in the down position, the contacts complete the earth path for the LH rear window motor The LH rear window motor is earthed via an SR wire to the LH rear window switch. From the down contacts of LH rear window switch the earth continues on an SY wire to the closed contacts of LH window console switch From the contacts of the LH rear console switch the earth continues on a B wire to earth header C0552.

LH rear window console switch - up
Operation of the LH window console switch in the up position, allows the feed from the rear window lift relay to pass through the down switch contacts to the LH rear window switch on an SY wire. The feed passes through the down switch contacts and is connected to the LH rear window motor on an SR wire

When the LH window console switch is set in the up position, the contacts complete the earth path for the LH rear window motor. The earth path from the LH rear window motor is connected to the LH rear window switch on an SO wire The earth continues through the up switch contacts and is connected to the LH window console switch on an SW wire. The earth passes through the down switch contacts and is connected to earth header C0552 on a B wire

RH rear window console switch - down
Operation of the RH window console switch in the down position, allows the feed from the rear window lift relay to pass through the up switch contacts to the RH rear window switch on an SY wire. The feed passes through the up switch contacts and is connected to the RH rear window motor on an SO wire.

When the RH window console switch is set in the down position the contacts complete the earth path for the RH rear window motor. The RH rear window motor is earthed via an SR wire to the down contacts of the RH rear window switch then on a SW wire to connector interface C0650-3/C0804-3 From this interface the feed continues on a SN wire to the RH window console switch. From the RH window console switch the earth continues via the closed down contacts, via a B wire to earth header C0552.

RH rear window console switch - up
Operation of the RH window console switch in the up position, allows the feed from the rear window lift relay to pass through the down switch contacts on an SN wire to connector interface C0650-3/C0804-3 From this interface the feed continues on a SW wire to the RH rear window switch. The feed passes through the down switch contacts and is connected to the RH rear window motor on an SR wire

When the RH window console switch is set in the up position, the contacts complete the earth path for the RH rear window motor. The earth path from the RH rear window motor is connected to the RH rear window switch on an SO wire. The earth continues on an SY wire to the up contacts of the RH rear window console switch From the RH rear window console switch the earth continues on a B wire to earth header 00552.

LH rear window switch - down
Operation of the LH rear window switch in the down position, allows the feed from the rear window lift relay to pass through the up contacts of the LH window console switch on an SW wire. The feed passes through the up switch contacts and is connected to the LH rear window motor on an SO wire.

When the LH rear window switch is set in the down position the contacts complete the earth path for the LH rear window motor. The earth path from the LH rear window motor is connected to the LH rear window switch on an SR wire. The earth continues through the down switch contacts and is connected via splice joint A358 to the window lift isolation switch on an SG wire. The earth is connected from the closed contacts of the window lift isolation switch on a B wire to earth header C0552.

LH rear window switch - up
Operation of the LH rear window switch in the up position, allows the feed from the rear window lift relay to pass through the down contacts of the LH window console switch to the rear window switch on an SY wire. The feed passes through the down switch contacts to the LH rear window motor on an SR wire.

When the LH rear window switch is set in the up position, the contacts complete the earth path for the LH rear window motor. The earth path from the LH rear window motor is connected to the LH rear window switch on an SO wire. The earth continues through the up switch contacts and is connected via splice joint A358 to the window lift isolation switch on an SG wire. The earth is connected from the closed contacts of the window lift isolation switch on a B wire to earth header C0552.

RH rear window switch - down
Operation of the RH rear window switch in the down position allows the feed from the rear window lift relay to pass through the up contacts of the RH window console switch on an SY wire to the RH rear window switch. The feed passes through the up switch contacts and is connected to the RH rear window motor on an SO wire

When the RH rear window switch is set in the down position the contacts complete the earth path for the LH rear window motor The earth path from the RH rear window motor is connected to the RH rear window switch on an SR wire. The earth continues through the switch down contacts and is connected via splice joint A358 to the window lilt isolation switch on an SG wire. The earth is connected from the closed contacts of the window lift isolation switch on a B wire to earth header C0552.

RH rear window switch - up
Operation of the RH rear window switch in the up position, allows the feed from the rear window lift relay to pass through the down contacts of the RH window console switch on an SN wire to connector interface C0650-3/C0804-3. From this interface the feed continues on an SW wire to the rear window switch The feed passes through the down switch contacts to the RH rear window motor on an SR wire.

When the RH rear window switch is set in the up position the contacts complete the earth path for the RH rear window motor. The earth path from the RH rear window motor is connected to the RH rear window switch on an SO wire The earth continues through the up switch contacts and is connected via splice joint A358 to the window lift isolation switch on an SG wire. The earth is connected from the closed contacts of the window lift isolation switch on a B wire to earth header C0552.

Window lift isolation switch
If the window lift isolation switch is latched out, the earth path from the LH and RH rear window switches is broken, preventing operation of the LH and RH rear window switches. Rear window operation using the console switches is not affected by the isolation switch.

When the window lift isolation switch is latched out the removal of the earth path also breaks the earth path for the LH and RH rear window switch illumination. Refer Interior Illumination - Description and Operation for switch illumination circuit description