Rear Wash

Rear wash
Rear wash will only operate when the following conditions are met:
^ Ignition switch is in position II.
^ Rear wash switch operated.

Operating the rear washer switch for longer than 0.4 second allows the rear washer pump motor and rear wipers to run as long as the switch is held. The wipers run for 4 seconds after the rear washer switch is released. Flicking the rear washer switch energises the rear washer pump motor for 0.4 second.

The rear washer operation has a higher priority than the intermittent wipe operation. If the intermittent wipe is active when a rear washer operation is initiated, the wash cycle executes and the intermittent wipe is re-instated at the end of the washer operation.