DVD Player: Service and Repair

NOTE: This article contains updated information called out in TSB TECLTB00184.

Digital Versatile Disc (DVD) Player
Removal
1. Remove the RH rear quarter trim panel.
2. Release the rear quarter trim panel mounting bracket.
^ Remove the 2 screws.





3. Remove the rear quarter trim panel mounting bracket.
^ Release the 2 clips.





CAUTION: Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

4. Release the rear seat entertainment module.
^ Remove the 3 nuts. TORQUE: 10 Nm
^ Position aside.





5. Release the DVD player from the body.
^ Remove the 4 Torx bolts.





CAUTION: Make sure that the fiber optic cables are not bent to a radius of less than 25 mm.

CAUTION: Make sure that the optical connectors are clean and free of foreign material.

6. Remove the DVD player.
^ Disconnect the 3 electrical connectors.





7. Remove the DVD player mounting bracket.
^ Remove the 8 screws.





Installation
1. To install, reverse the removal procedure.