Amplifier: Service and Repair

Audio Amplifier

Removal
1. Disconnect the battery ground cable.
2. Remove the RH front seat.

CAUTION: Cover fibre optic cable connectors to minimise dust ingress and avoid bending the cables in a radius of less than 30 mm.

3. Remove the amplifier.
^ Remove the 4 bolts.
^ Disconnect the 5 electrical connectors.





Installation
1. Install the amplifier.
^ Install the bolts and tighten to 10 Nm (7 ft. lbs.).
^ Connect and secure the electrical connectors.

2. Install the front seat.
3. Connect the battery ground cable.