Front Seat Track Motor

Front Seat Track Motor

Service Repair No - 78.70.25

Removal

NOTE: The front seat track motor is supplied as part of the front seat lower frame assembly.

1. Remove the front seat.
2. Remove the front seat cushion side finisher.
^ Remove the 2 Torx screws.
^ Release from the 4 clips.







3. Release the front seat control switch.
^ Remove the 2 screws.
^ Remove the 2 clips.







4. Remove the front seat base finisher.
^ Remove the screw.
^ Release the 2 clips.







5. Remove the front seat base.
^ Remove the 6 nuts.







6. Remove the front seat track motor.
^ Disconnect the electrical connector.
^ Release the electrical connector.
^ Remove the 8 nuts.







Installation

1. Install the front seat track motor.
^ Tighten the nuts to 25 Nm (18 lb.ft).
^ Connect the electrical connector.
^ Secure the electrical connector

2. Install the front seat base.
^ Tighten the nuts to 25 Nm (18 lb.ft).

3. Install the front seat base finisher.
^ Secure in the clips.
^ Tighten the screw.

4. Install the front seat cushion side finisher.
^ Secure in the clips.
^ Tighten the screws.

5. Install the front seat control switch.
^ Secure in the clips.
^ Tighten the screws.

6. Install the front seat.