Rear Seat Backrest Cover - Vehicles With: 60/40 Split Seat

Rear Seat Backrest Cover - Vehicles With: 60/40 Split Seat

Service Repair No - 78.90.72

Removal

NOTE: This procedure shows the removal of both the LH and RH covers.

1. LH seat only: Remove the safety belt retractor cover and guide.
^ Remove the 2 screws.







2. Remove the rear seat release handle.







3. Remove the rear seat release handle finisher.
^ Remove the screw.







4. Remove the rear seat head restraint.
^ Depress the 2 retaining clips.







5. Remove the rear seat head restraint retaining clips.







6. Release the rear LH seat backrest cover.
^ Release the 10 clips.







7. Remove the rear LH seat backrest cover.
^ Remove the 41 hog rings.







8. Release the rear RH seat backrest cover.
^ Release the 9 clips.







9. Remove the rear RH seat backrest cover.
^ Remove the 24 hog rings.







Installation

1. Install the rear seat backrest cover.
^ Install the hog rings.
^ Attach the clips.

2. Install the rear seat head restraint retaining clips.
3. Install the rear seat head restraint.
4. Install the rear seat release handle finisher.
^ Tighten the screw.

5. Install the rear seat release handle.
6. Install the safety belt guide and retractor cover.
^ Attach the safety belt guide and retractor cover.
^ Tighten the screws.