Diesel Data: Automotive Repair

Rear Seat Cushion Cover - Vehicles With: 40/20/40 Split Seat



Rear Seat Cushion Cover - Vehicles With: 40/20/40 Split Seat

Removal
1. Remove the outer backrest hinge cover.
^ Fold the seat assembly forwards.
^ Remove the screw.





2. Remove the inner backrest hinge cover.
^ Release the backrest cover side clip.
^ Release the 2 clips.
^ Remove the screw.





3. Remove the rear seat cushion side finisher.
^ Remove the 2 screws.





4. Remove the seat rear release strap finisher.
^ Remove the screw.





5. Remove the seat front release strap finisher.
^ Remove the screw.





6. Remove the seat cushion finishers.
^ Remove the 2 screws.





7. Remove the rear safety belt buckle.
^ Remove the Torx bolt.
^ Release the spring.





8. Release the rear seat cushion cover.
^ Release the 15 clips.





9. Remove the rear seat cushion cover.
^ Remove the 22 hog rings.





Installation
1. Install the rear seat cushion cover.
^ Install the hog rings.
^ Install the clips.

2.Install the rear safety belt buckle.
^ Attach the spring.
^ Tighten the Torx bolt to 45 Nm (33 ft. lbs.).

3. Install the seat cushion finishers.
^ Tighten the screws.

4. Install the seat front release strap finisher.
^ Remove the screw.
^ Tighten the screw.

5. Install the seat rear release strap finisher.
^ Tighten the screw.

6. Install the inner backrest hinge cover.
^ Attach the clips.
^ Tighten the screw.

7. Install the outer backrest hinge cover.
^ Tighten the screw.
^ Fold seat assembly rearwards.

8. Install the rear seat cushion side finisher.
^ Tighten the screws.