Second Row Safety Belt Retractor

Second Row Safety Belt Retractor

Service Repair No - 76.73.23

Removal
1. Remove the C-pillar upper trim panel.
2. Remove the C-pillar lower trim panel.
3. Release the safety belt upper anchor.
^ Remove and discard the Torx bolt.





4. Remove the second row safety belt retractor.
^ Remove and discard the Torx bolt.





Installation
1. Install the second row safety belt retractor.
^ Tighten the Torx bolt to 40 Nm (30 ft. lbs.).

2. Install the safety belt upper anchor.
^ Tighten the Torx bolt to 40 Nm (30 ft. lbs.).

3. Install the C-pillar lower trim panel.
4. Install the C-pillar upper trim panel.