D-Pillar Trim Panel

D-Pillar Trim Panel (76.13.30)

Removal

1. Remove the C-pillar lower trim panel.
2. Vehicles fitted with 7 seats: Release the seat belt.
^ Remove and discard the bolt.

3. Remove the D-pillar upper trim panel.
^ Release the 4 clips.
^ Disconnect the electrical connector.







4. NOTE: Do not disassemble further if the component is removed for access only.

Remove the speaker.
^ Remove the 3 screws.

Installation

1. To install, reverse the removal procedure.
^ Tighten the new Torx bolt to 40 Nm (30 lb.ft).