Front Seat Tilt Motor

Front Seat Tilt Motor

Service Repair No - 78.70.29

Removal

1. Remove the front seat.
2. Remove the front seat cushion side finisher.
^ Remove the 2 Torx screws.
^ Release from the 3 clips.







3. Release the front seat control switch.
^ Remove the 2 screws.
^ Remove the 2 clips.







4. Remove the front seat cushion assembly.
5. Remove the front seat tilt motor assembly.
^ Remove the 4 Torx bolts.
^ Disconnect the 7 electrical connectors.







6. NOTE: Do not disassemble further if the component is removed for access only.

Remove the seat module bracket.
^ Remove the 2 Torx bolts.







Installation

1. Install the seat module bracket.
^ Tighten the Torx bolts to 10 Nm (7 lb.ft).

2. Install the front seat tilt motor assembly.
^ Tighten the 4 Torx bolts to 10 Nm (7 lb.ft).
^ Connect the electrical connectors.

3. Install the front seat cushion assembly.
4. Install the front seat cushion side finisher.
^ Secure in the clips.
^ Tighten the screws.

5. Install the front seat control switch.
^ Secure in the clips.
^ Tighten the screws.

6. Install the front seat.