Front Safety Belt Retractor

Front Safety Belt Retractor

Service Repair No - 76.73.13

Removal
1. Position the front seat fully forwards.
2. Make the SRS system safe.
3. Remove the B-pillar upper trim panel.
4. Release the safety belt upper anchor from the B-pillar.
^ Remove and discard the Torx bolt.





5. Release the front seat switch pack trim panel for access.
^ Remove the 2 screws.





6. Remove the front safety belt retractor.
^ Remove and discard the Torx bolt.





Installation
1. Install the front safety belt retractor.
^ Tighten the Torx bolt to 40 Nm (30 ft. lbs.).

2. Install the front seat switch pack trim panel.
^ Tighten the screws.

3. Attach the safety belt upper anchor.
^ Tighten the Torx bolt to 40 Nm (30 ft. lbs.).

4. Install the B-pillar upper trim panel.