Third Row Safety Belt Retractor

Third Row Safety Belt Retractor

Service Repair No - 76.73.28

Removal
1. Remove the D-pillar upper trim panel.
2. Release the safety belt upper anchor.
^ Remove and discard the Torx bolt.





3. Remove the third row safety belt retractor.
^ Remove and discard the Torx bolt.





Installation
1. Install the third row safety belt retractor.
^ Tighten the Torx bolt to 40 Nm (30 ft. lbs.).

2. Install the safety belt upper anchor.
^ Tighten the Torx bolt to 40 Nm (30 ft. lbs.).

3. Install the D-pillar upper trim panel.