Front Suspension

Stabilizer Bar Link

Service Repair No - 60.10.02

Removal

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
2. Remove the wheel and tire.





3. CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.

Remove the stabilizer bar link.
^ Remove the 2 nuts.

Installation
1. Install the stabilizer bar link.
^ Tighten the nuts to 115 Nm (85 ft. lbs.).
2. Install the wheel and tire.