Transmission Mount: Service and Repair

Transmission Support Insulator

Service Repair No - 12.45.08

Removal

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
2. Remove the transmission crossmember.

3. NOTE: 4.4L illustration shown, 4.0L and 2.7L Diesel are similar.

Remove the transmission support insulator.
^ Remove the 4 bolts.

Installation
1. To install, reverse the removal procedure.
^ Clean the component mating faces.
^ Tighten the bolts to 60 Nm (44 ft. lbs.).