Rear Axle Housing Support Insulator

Rear Axle Housing Support Insulator

Service Repair No - 51.15.44





Special Service Tools

Removal

NOTE: Take note of the fitted position of the bush.

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
2. Remove the wheels and tires.
3. Remove the rear differential.





4. NOTE: Take note of the fitted position of the bush.

Using the special tools, remove the rear axle housing support insulator.

Installation





1. Using the special tools, install the rear axle housing support insulator.
2. Install the rear differential.
3. Install the wheels and tires.
^ Tighten the wheel nuts to 140 Nm (103 ft. lbs.).