Differential Output Shaft Bearing: Service and Repair

Halfshaft Bearing

Service Repair No - 51.10.29





Special Service Tools
Removal

1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
2. Remove the wheel and tire.
3. Remove and discard the halfshaft oil seal.





4. Using the special tool, remove and discard the halfshaft bearing.

Installation





1. Using the special tools, install a new halfshaft bearing.
2. Install a new halfshaft oil seal.
3. Install the wheel and tire.
^ Tighten the wheel nuts to 140 Nm (103 ft. lbs.).