Amplifier: Service and Repair
Audio Amplifier
Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications Service and Repair
2 Remove the RH front seat. For additional information, refer to Front Seat
3
CAUTION: Cover fiber optic cable connectors to minimize dust ingress and avoid bending the cables in a radius of less than 30 mm.
Remove the amplifier.
- Remove the 4 bolts.
- Disconnect the 5 electrical connectors.
Installation
1 Install the amplifier.
- Install the bolts and tighten to 10 Nm (7 lb.ft).
- Connect and secure the electrical connectors.
2 Install the front seat. For additional information, refer to Front Seat
3 Connect the battery ground cable. For additional information, refer to Specifications Service and Repair
4 Using the Land Rover approved diagnostic equipment, follow the on-screen instructions and configure the audio unit amplifier.