Hood Latch Release: Service and Repair

Hood Latch Release Handle

Removal
1 Remove the cowl side trim panel. For additional information, refer to Cowl Side Trim Panel Cowl Side Trim Panel




2 Disconnect the hood release cable from the connecting box.
- Open the connecting box cover.




3 Remove the hood release lever housing.
- Remove the bolt.
- Disconnect the hood release cable.

Installation
1 Install the hood release lever housing.
- Connect the hood release cable.
- Tighten the bolt to 5 Nm (3.7 lb.ft).
2 Attach the hood release cable to the connecting box.
- Close the connecting box cover.
3 Install the cowl side trim panel. For additional information, refer to Cowl Side Trim Panel Cowl Side Trim Panel