Rear Seat Backrest Cover [Vehicles With: 60/40 Split Seat]

Rear Seat Backrest Cover

Removal

NOTE:
This procedure shows the removal of both the LH and RH covers.




1 LH seat only: Remove the safety belt retractor cover and guide.
- Remove the 2 screws.




2 Remove the rear seat release handle.




3 Remove the rear seat release handle finisher.
- Remove the screw.




4 Remove the rear seat head restraint.
- Depress the 2 retaining clips.




5 Remove the rear seat head restraint retaining clips.




6 Release the rear LH seat backrest cover.
- Release the 10 clips.




7 Remove the rear LH seat backrest cover.
- Remove the 41 hog rings.




8 Release the rear RH seat backrest cover.
- Release the 9 clips.




9 Remove the rear RH seat backrest cover.
- Remove the 24 hog rings.

Installation
1 Install the rear seat backrest cover.
- Install the hog rings.
- Attach the clips.
2 Install the rear seat head restraint retaining clips.
3 Install the rear seat head restraint.
4 Install the rear seat release handle finisher.
- Tighten the screw.
5 Install the rear seat release handle.
6 Install the safety belt guide and retractor cover.
- Attach the safety belt guide and retractor cover.
- Tighten the screws.