Camshaft Drive Cassette LH

Camshaft Drive Cassette LH

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications Service and Repair
2 Remove the cylinder head LH assembly. For additional information, refer to Cylinder Head LH Cylinder Head LH
3 Remove the timing drive components. For additional information, refer to Timing Drive Components Timing Drive Components




4 Remove the camshaft drive cassette assembly.
- Remove the bolt retaining the chain guide.




5
NOTE:
Do not disassemble further if the component is removed for access only.
Disassemble the cassette assembly.
- Release the cable tie.
- Remove the sprockets and the chain.
- Clean and inspect the components for deterioration.

Installation
1 Assemble the cassette assembly.
- Install the chain and the sprockets.
- Secure with a cable tie.
2 Install the camshaft drive cassette assembly.
- Tighten the bolt to 25 Nm (18 lb.ft).
3 Install the timing drive components. For additional information, refer to Timing Drive Components Timing Drive Components
4 Install the cylinder head LH assembly. For additional information, refer to Cylinder Head LH Cylinder Head LH
5 Connect the battery ground cable. For additional information, refer to Specifications Service and Repair