Exhaust Pipe: Service and Repair

Tailpipe

Special Service Tools






Pipe cutter-exhaust

100-051 (LRT-99-027)

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.




2 Remove the tail pipe.
- Using 100-051, cut the tail pipe at the point indicated by a depression in the pipe.
- Disconnect from the exhaust hanger.

Installation
1
NOTE:
Do not tighten the retaining clamp at this stage.
Install the tail pipe.
- Clean the components.
- Install the retaining clamp.
2 Align the tail pipe and tighten the retaining clamp to 55 Nm (40 lb.ft).