Auxiliary Blower Motor: Service and Repair

Blower Motor

Removal
1 Disconnect the battery ground cable. For additional information, refer to Specifications Service and Repair
2 Remove the LH C-pillar lower trim panel For additional information, refer to C-Pillar Lower Trim Panel C-Pillar Lower Trim Panel




3
NOTE:
Note the fitted position.
Remove the blower motor.
- Disconnect the electrical connector.
- Remove the 3 screws.

Installation
1 Install the blower motor.
- Tighten the screws.
- Connect and secure the electrical connector.
2 Install the C-pillar lower trim panel. For additional information, refer to C-Pillar Lower Trim Panel C-Pillar Lower Trim Panel
3 Connect the battery ground cable. For additional information, refer to Specifications Service and Repair