Second Row Center Safety Belt Retractor [Vehicles With: 60/40 Split Seat]

Second Row Center Safety Belt Retractor

Removal





1 Release the safety belt retractor cover and guide
- Remove the 2 screws.
- Remove the safety belt guide.
- Remove the retractor cover.




2 Remove the safety belt lower anchor.
- Raise the seat cushion.
- Remove and discard the nut.




3 Remove the safety belt retractor assembly.
- Remove and discard the Torx bolt.

Installation
1 Install the safety belt retractor assembly.
- Tighten the new Torx bolt to 40 Nm (30 lb.ft).
2 Install the safety belt guide and retractor cover.
- Attach the safety belt guide and retractor cover.
- Tighten the screws.
3 Install the safety belt lower anchor.
- Tighten the new nut to 40 Nm (30 lb.ft).
- Lower the seat cushion.