Cabin Air Filter / Purifier: Service and Repair

Pollen Filter

Plenum Chamber (80.15.62)

Removal

1. Secure the hood in the service position.
- Release the support struts.

2. Disconnect the battery ground cable.





3. Remove the hood seal from the plenum chamber.





4. Remove the plenum chamber.
- Remove the 2 nuts.
- Vehicles with diesel engine only: Release the air conditioning (A/C) line bracket.

5. Note:
Do not disassemble further if the component is removed for access only.

Remove the pollen filter.
- Release the 4 clips.
- Release the pollen filter housing cover.

Installation




1. Install the pollen filter.
- Secure the pollen filter housing cover.

2. Note:
Make sure thet the air inlet seals are fully seated before installation.

Install the plenum chamber.
- Vehicles with diesel engine only: Attach the A/C line bracket.
- Tighten the nuts to 10 Nm (7 lb.ft).

3. Install the hood seal.

4. Connect the battery ground cable.

5. Connect the hood support struts.