Rear Safety Belt Retractor

Rear Safety Belt Retractor

Removal
1 Remove the C-pillar trim panel. For additional information, refer to C-Pillar Upper Trim Panel




2 Release the safety belt upper anchor.
- Remove and discard the bolt.
3 Remove the rear safety belt.
- Remove and discard the bolt.
- Release the rear safety belt retractor.

Installation
1 Install the rear safety belt.
- Secure the safety belt retractor.
- Install the new bolt and tighten to 31 Nm (23 lb.ft).
2 Secure the safety belt upper anchor.
- Install the new bolt and tighten to 31 Nm (23 lb.ft).
3 Install the C-Pillar trim panel. For additional information, refer to C-Pillar Upper Trim Panel