Transfer Case Input Shaft Seal

Transfer Case Input Shaft Seal

Special Service Tools






Oil seal installer

308-598





Slide hammer

100-012





Slide hammer adaptor

100-012-01





Seal remover input and output

308-375

Removal

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
1
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2 Remove the transfer case. For additional information, refer to Transfer Case - 5.0L NA V8 - AJ133/5.0L SC V8 - AJ133




3
CAUTION: Care must be taken to avoid damage to the seal register and running surface.
Carefully remove and discard the oil seal.
- Use the special tools.

Installation





1
CAUTION: Oil seals must be fitted dry.
Install a new seal.
- Clean the seal register.
- Use the special tool.
2 Install the transfer case. For additional information, refer to Transfer Case - 5.0L NA V8 - AJ133/5.0L SC V8 - AJ133