Windshield Wiper Motor

Windshield Wiper Motor

Removal
1 Disconnect the battery ground cable. For additional information, refer to Procedures




2 Remove the windshield wiper motor.
- Mark the position of the windshield wiper motor linkage to aid assembly.
- Remove the windshield wiper motor to windshield wiper motor linkage assembly nut.
- Release the wiper linkage assembly from the windshield wiper motor.
- Remove the 3 windshield wiper motor to support bracket bolts.
- Disconnect the electrical connector.

Installation
1 Install the windshield wiper motor.
- Tighten the bolts to 10 Nm (7 lb.ft).
- Connect the electrical connector.
2 Carry out the windshield wiper motor park operation.
- Connect the battery ground cable.
- Turn the ignition key to the ON position and make sure the windshield wiper motor is in the park position, turn the ignition key to the OFF position.
- Disconnect the battery ground cable.
3 Install the windshield wiper motor and linkage.
- Reposition the windshield wiper motor linkage to its original position.
- Install the windshield wiper motor to windshield wiper motor linkage assembly nut.
- Tighten the nut to 25 Nm (18 lb.ft).
4 Connect the battery ground cable. For additional information, refer to Procedures