Rear

Fig. 22 Identifying Stabilizer Bar Links:

Removal
1. Raise and support vehicle, then remove wheel and tire assemblies.
2. On all models, remove stabilizer links.
3. Disconnect ABS speed sensor and wire clamps.
4. Remove stabilizer bar brackets and bushings.
5. On all models, remove stabilizer bar from body.

Installation
1. Position stabilizer bar in body.
2. On all models, install stabilizer bar brackets and bushings, then torque bolts to specifications.
3. Connect ABS speed sensor and wire clamps.
4. Install stabilizer link, then wheel and tire assembly and torque to specifications.