Parking Brake Pedal: Service and Repair

Parking Brake Pedal Components:

REMOVAL

1. Release Parking Brake Pedal.
2. Disconnect Parking Brake Switch connector.
3. Remove Parking Brake Pedal assembly.
Remove the 3 nuts and Parking Brake Pedal assembly.
Torque: 36 Nm (370 kg.cm, 27 ft. lbs.)
4. Disconnect Parking Brake wire.
Remove clip and disconnect the Parking Brake wire.
5. Remove Parking Brake Switch.
Remove the screw and Parking Brake Switch.

INSTALLATION

Installation is in the reverse order of removal.