Removal

1. Remove engine under cover.
2. Drain engine coolant.
3. Remove the bolt, 2 nuts and V-bank cover.





4. Remove No. 1 ignition coil.
(a) Disconnect these connectors and cord:
(1) Ignition coil connector.
(2) Noise filter connector.
(3) High-tension cord.
(b) Remove the 2 bolts and ignition coil.
5. Remove intake air connector. Remove the bolt and engine wire cover.
6. Remove timing belt covers.
7. Disconnect radiator hose from water inlet.





8. Disconnect pressure and suction hoses from hydraulic pump.





9. Remove hydraulic pump.
(a) Disconnect the solenoid valve connector.
(b) Remove the 2 bolts and 2 nuts.
(c) Disconnect the crankshaft position sensor wire clamp.
(d) Remove the hydraulic pump.