Journal Diameter and Taper

JOURNAL DIAMETER
1. Using a micrometer, measure the diameter of each main journal and crank pin.
Main journal diameter: 66.988-67.000 mm (2.6373-2.6378 inch).
Crank pin diameter: 51.982-52.000 mm (2.0465-2.0472 inch).
2. If the diameter is not as specified, check the oil clearance.
- If necessary, replace the crankshaft.

JOURNAL TAPER
Check each main journal and crank pin for taper and out-of-round as shown.
Maximum taper and out-of-round: 0.02 mm (0.0008 inch).
If the taper and out-of-round is greater than maximum, replace the crankshaft.