Exhaust System: Service and Repair

Exhaust System Service

Exhaust System Exploded Diagram:

Refer to the illustration when servicing exhaust system components.

NOTE:
- Install a new gasket to the exhaust pipe in the correct direction.





- Fit together the clamp protrusion and pipe hollow, and tighten the clamp bolt until A and B of the clamp are just touching.
- Tighten to 44 Nm (32 ft. lbs.).

Tighten the clamp bolt holding the front exhaust pipe to the center exhaust pipe, then tighten the four bolts holding the pipe support bracket to the transmission to 44 Nm (32 ft. lbs.).