Diesel Data: Automotive Repair
Home >> Lexus >> 2003 >> SC 430 V8-4.3L (3UZ-FE) >> Repair and Diagnosis >> Cruise Control >> Testing and Inspection >> Initial Inspection and Diagnostic Overview >> Diagnostic Strategies >> Problem Symptom Confirmation (Road Test)

Problem Symptom Confirmation (Road Test)

PROBLEM SYMPTOM CONFIRMATION (ROAD TEST)

a. Inspect the SET switch.




1. Push the main switch button to ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. Push down the control switch to the SET/COAST.
4. After releasing the switch, check that the vehicle cruises at the desired speed.

b. Inspect the ACCEL switch.




1. Push the main switch button to ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. Check that the vehicle speed increase while the control switch is pulled up to RES/ACC, and that the vehicle cruises at the set speed when the switch is released.
4. Momentarily push the control switch upward in the RES/ACC and then immediately release it. Check that the vehicle speed increases by about 1.5 km/h (Tap-up function).

c. Inspect the COAST switch.




1. Push the main switch button to ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. Check that the vehicle speed decrease while the control switch is pushed down to SET/COAST, and the vehicle cruises at the set speed when the switch is released.
4. Momentarily push the control switch downward to SET/COAST, and then immediately release it. Check that the vehicle speed decrease by about 1.5 km/h (Tap-down function).

d. Inspect the CANCEL switch.




1. Push the main switch button to ON.
2. Drive at a desired speed (40 km/h (25 mph) or higher).
3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal
- Shift to except D position
- Push the main switch button to OFF
- Pull the cruise control switch to CANCEL

e. Inspect the RESUME switch.




1. Push the main switch button to ON.
2. Drive at desired speed (40 km/h (25 mph) or higher).
3. When operating one of the followings, check that the cruise control system is cancelled and that the normal driving mode is reset.
- Depress the brake pedal
- Shift to except D position
- Press the main switch button to OFF

4. After pulling up the control switch to RES/ACC at the driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed prior to the cancellation.
Diesel-Data.com