Removal and Installation

REPLACEMENT

HINT:
- Replacement procedure of the RH side is the same as that for the LH side.
- Installation is in the reverse order of removal.

1. OBSERVE AIR BAG SYSTEMS SERVICE PRECAUTIONS
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE ROOF HEADLINING ASSY
4. REMOVE CURTAIN SHIELD AIR BAG ASSY LH
(a) Disconnect the connector from the curtain shield airbag assy LH.

NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 9 bolts and curtain shield airbag assy LH.





HINT: Remove the bolts from front side of the vehicle in order.

5. INSTALL CURTAIN SHIELD AIR BAG ASSY LH
(a) Install the curtain shield airbag assy LH with the 9 bolts.
Torque: 14 Nm (143 kgf-cm, 10 ft-lbf)

HINT: Install the bolts from rear side of the vehicle in order.

(b) Connect the connector to the curtain shield airbag assy LH.

NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

6. INSPECT CURTAIN SHIELD AIR BAG ASSY LH
7. INSTALL ROOF HEADLINING ASSY
8. CONNECT BATTERY NEGATIVE TERMINAL
9. INSPECT SRS WARNING LIGHT
Refer to Air Bag Systems; Testing and Inspection.