Procedures

DISPOSAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- A bolt without torque specification is a standard bolt.







1. DISPOSE OF HOOD SUPPORT ASSEMBLY LH
a. Horizontally fix the stay in a vise with the piston-rod pulled out.
b. Wearing safety glasses, gradually cut a part between A and B as shown in the illustration using a metal saw to gradually release the gas.

CAUTION: Be careful to cover the area that is being cut as there is a possibility that metal debris could be blown out by the gas (the gas is colorless, odorless and harmless).