Removal and Replacement

REPLACEMENT

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- A bolt without a torque specification is a standard bolt.




1. REMOVE HOOD SUPPORT ASSEMBLY LH
a. Remove the 2 bolts and hood support.

HINT: Remove the hood support while supporting the hood panel with your hands.

2. INSTALL HOOD SUPPORT ASSEMBLY LH
a. Install the hood support with the 2 bolts.

Torque: 22 Nm (225 kgf.cm, 19 ft.lbf)