Blower Motor: Service and Repair

Blower Assy:

OVERHAUL

HINT:
- Installation is in the reverse order of removal.

1. DISCONNECT NEGATIVE TERMINAL CABLE FROM BATTERY
2. REMOVE FRONT DOOR SCUFF PLATE LH
3. REMOVE FRONT PILLAR GARNISH LH
4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.2
5. REMOVE INSTRUMENT PANEL GARNISH SUB-ASSY RH
6. REMOVE GLOVE COMPARTMENT DOOR ASSY W/ INSTRUMENT PANEL AIRBAG ASSY LOWER NO.2
7. REMOVE AIR SUSPENSION AND HEADLIGHT BEAM LEVEL CONTROL ECU
a. Disconnect the connectors.
b. Remove the 2 nuts and air suspension and headlight beam level control ECU.




8. REMOVE BLOWER ASSY
a. Disconnect the connectors.
b. Remove the nut and 3 bolts.
c. Remove the blower assy.

9. REMOVE CLEAN AIR FILTER SUB-ASSY
10. REMOVE CLEAN AIR FILTER




11. REMOVE AIR CONDITIONING AMPLIFIER ASSY
a. Remove the 3 screws and air conditioning amplifier assy.




12. REMOVE AIR INLET SERVOMOTOR
a. Remove the 3 screws and the air inlet servomotor.

13. REMOVE BLOWER MOTOR ASSY (COOLING UNIT MOTOR SUB-ASSY W/FAN)
a. Remove the 3 screws and blower motor assy (cooling unit motor sub-assy w/fan).