Diesel Data: Automotive Repair

Headlamp Washer Motor: Service and Repair

HEADLAMP WASHER ACTUATOR SUB-ASSY

REPLACEMENT

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. REMOVE ENGINE UNDER COVER NO.1
2. REMOVE FRONT FENDER LINER LH
3. REMOVE FRONT FENDER LINER RH
4. REMOVE FRONT BUMPER COVER




5. REMOVE HEADLAMP WASHER ACTUATOR SUB-ASSY LH
a. Pull out the headlamp cleaner washer nozzle.
b. Disengage the 2 claws and remove the headlamp cleaner washer nozzle.




c. Remove the bolt.




d. Remove the headlamp washer actuator from the front bumper cover by pushing the upper part of the headlamp washer actuator sub-assy LH.




6. INSTALL HEADLAMP WASHER ACTUATOR SUB-ASSY LH
a. Install the headlamp washer actuator sub-assy LH to the front bumper cover with the screws.
b. Install the headlamp cleaner washer nozzle and engage the 2 claws.

7. INSTALL FRONT BUMPER COVER
8. INSTALL FRONT FENDER LINER RH
9. INSTALL FRONT FENDER LINER LH
10. INSTALL ENGINE UNDER COVER NO.1