Collision Avoidance Warning Indicator: Service and Repair

Clearance Warning Buzzer:

CLEARANCE WARNING BUZZER

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
2. REMOVE UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
5. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
6. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (W/o Navigation System)
7. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (W/ Navigation System)
8. REMOVE CLEARANCE WARNING BUZZER




a. Disconnect the connector.




b. Disengage the clamp and remove the clearance warning buzzer.

INSTALLATION

1. INSTALL CLEARANCE WARNING BUZZER




a. Engage the clamp and install the clearance warning buzzer.




b. Connect the connector.

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (W/o Navigation System)
3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (W/ Navigation System)
4. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
5. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
6. INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
7. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
9. ADJUST CLOCK