Radio/Stereo: Service and Repair

Radio Receiver:

Radio Receiver:

RADIO RECEIVER

REMOVAL

1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
2. REMOVE UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
5. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

6. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)




a. Remove the 4 bolts.
b. Pull the integration control panel with radio receiver assembly toward the rear of the vehicle and disengage the 2 clips.
c. Disconnect each connector and remove the integration control panel with radio receiver assembly.

7. REMOVE NO. 1 RADIO BRACKET (w/o Navigation System)




a. Remove the 4 bolts, screw, and No. 1 radio bracket.

8. REMOVE NO. 2 RADIO BRACKET (w/o Navigation System)




a. Remove the 4 bolts, screw, and No. 2 radio bracket.

9. REMOVE RADIO RECEIVER ASSEMBLY (w/o Navigation System)




a. Disengage the 2 claws and 6 clips.
b. Remove the radio receiver assembly.

10. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)




a. Remove the 4 bolts.
b. Pull the multi-display with radio receiver assembly toward the rear of the vehicle and disengage the 2 clips.
c. Disconnect each connector and remove the multidisplay with radio receiver assembly.

11. REMOVE NO. 1 RADIO BRACKET (w/ Navigation System)




a. Remove the 6 bolts and No. 1 radio bracket.

12. REMOVE NO. 2 RADIO BRACKET (w/ Navigation System)




a. Remove the 6 bolts and No. 2 radio bracket.

13. REMOVE RADIO RECEIVER ASSEMBLY (w/ Navigation System)




a. Disengage the 2 claws and 4 clips.
b. Remove the radio receiver assembly.

INSTALLATION

1. INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System)




a. Engage the 2 claws and 6 clips and install the radio receiver assembly.

2. INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)




a. Install the No. 2 radio bracket with the 4 bolts and screw.

3. INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)




a. Install the No. 1 radio bracket with the 4 bolts and screw.

4. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)

a. Connect each connector.




b. Engage the 2 clips.
c. Install the integration control panel with radio receiver assembly with the 4 bolts.

5. INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System)




a. Engage the 2 claws and 4 clips and install the radio receiver assembly.

6. INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)




a. Install the No. 2 radio bracket with the 6 bolts.

7. INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)




a. Install the No. 1 radio bracket with the 6 bolts.

8. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)

a. Connect each connector.




b. Engage the 2 clips.
c. Install the multi-display with radio receiver assembly with the 4 bolts.

9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
11. INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
12. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
13. ADJUST CLOCK