Fuel Door Release Actuator: Service and Repair

FUEL LID OPENER MOTOR ASSEMBLY

Fuel Lid Opener Motor Assembly:

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT
2. REMOVE NO. 2 SPARE WHEEL COVER
3. REMOVE SPARE WHEEL COVER TRAY
4. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY
5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
6. REMOVE REAR FLOOR FINISH PLATE
7. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER LH
8. REMOVE FUEL LID OPENER MOTOR ASSEMBLY





a. Disconnect the connector.
b. Remove the lock and nut as shown in the illustration.
c. Remove the fuel lid with motor lock assembly.

INSTALLATION

1. INSTALL FUEL LID OPENER MOTOR ASSEMBLY





a. Install the lock and nut as shown in the illustration.

Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)

b. Connect the connector.

2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH
3. INSTALL REAR FLOOR FINISH PLATE
4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK
5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
6. INSTALL SPARE WHEEL COVER TRAY
7. INSTALL NO. 2 SPARE WHEEL COVER
8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT