Blower Unit

Blower Unit:

BLOWER UNIT

REMOVAL

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
3. DISCONNECT BATTERY NEGATIVE TERMINAL

NOTE: Wait for 90 seconds after disconnecting the terminal to prevent the airbag from deploying.

4. REMOVE COOL AIR INTAKE DUCT SEAL
5. REMOVE HOOD HINGE COVER (for LH Side)
6. REMOVE HOOD HINGE COVER (for RH Side)
7. REMOVE ENGINE ROOM SIDE COVER LH
8. REMOVE ENGINE ROOM SIDE COVER RH
9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
10. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
11. REMOVE FRONT SUSPENSION UPPER CENTER BRACE
12. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
13. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
14. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
15. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
16. DISCONNECT SUCTION PIPE SUB-ASSEMBLY
17. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY
18. DISCONNECT HEATER OUTLET WATER HOSE
19. DISCONNECT HEATER INLET WATER HOSE
20. REMOVE LOWER NO. 3 STEERING WHEEL COVER
21. REMOVE LOWER NO. 2 STEERING WHEEL COVER
22. REMOVE STEERING PAD
23. REMOVE STEERING WHEEL ASSEMBLY
24. REMOVE FRONT DOOR SCUFF PLATE LH
25. REMOVE FRONT DOOR OPENING TRIM COVER LH
26. REMOVE SIDE INSTRUMENT PANEL LH
27. REMOVE INSTRUMENT PANEL FINISH PANEL END LH
28. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
29. REMOVE STEERING COLUMN COVER
30. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY
31. REMOVE TILT & TELESCOPIC SWITCH
32. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
33. REMOVE COMBINATION METER ASSEMBLY
34. REMOVE NO. 1 SWITCH HOLE BASE
35. REMOVE INSTRUMENT PANEL FINISH PANEL END RH
36. REMOVE FRONT DOOR SCUFF PLATE RH
37. REMOVE FRONT DOOR OPENING TRIM COVER RH
38. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
39. REMOVE SIDE INSTRUMENT PANEL RH
40. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
41. REMOVE LOWER INSTRUMENT PANEL RH
42. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
43. REMOVE UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
44. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
45. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
46. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
47. REMOVE HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System)
48. REMOVE HEATER SEAT SWITCH CONSOLE BASE (w/ Seat Heater System)
49. REMOVE CONSOLE BOX POCKET
50. REMOVE CONSOLE BOX CARPET
51. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
52. REMOVE REAR CONSOLE BOX ASSEMBLY
53. REMOVE FRONT PILLAR GARNISH LH
54. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
55. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)
56. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
57. REMOVE FRONT PILLAR GARNISH RH
58. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
59. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)
60. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
61. REMOVE NO. 1 SPEAKER HOLE COVER
62. REMOVE FRONT STEREO COMPONENT SPEAKER ASSEMBLY
63. REMOVE NO. 1 INSTRUMENT PANEL MOUNTING BRACKET
64. REMOVE PUSH START SWITCH
65. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY
66. REMOVE ROOM TEMPERATURE SENSOR
67. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/o DVD Player)
68. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/ DVD Player)
69. REMOVE FLOOR CARPET BRACKET LH
70. REMOVE FLOOR CARPET BRACKET RH
71. REMOVE NO. 2 CONSOLE BOX DUCT
72. REMOVE NO. 3 CONSOLE BOX DUCT
73. REMOVE NO. 1 CONSOLE BOX DUCT
74. REMOVE REAR NO. 2 AIR DUCT
75. REMOVE REAR NO. 1 AIR DUCT
76. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY
77. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY
78. REMOVE STEERING COLUMN ASSEMBLY
79. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
80. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY

81. REMOVE BLOWER ASSEMBLY

a. Disconnect the connector.
b. Remove the 2 screws and blower assembly.

INSTALLATION

1. INSTALL BLOWER ASSEMBLY

a. Install the blower assembly with the 2 screws.
b. Connect the connector.

2. INSTALL INSTRUMENT PANEL REINFORCEMENT ASSEMBLY
3. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY
4. INSTALL STEERING COLUMN ASSEMBLY
5. CONNECT STEERING INTERMEDIATE SHAFT ASSEMBLY
6. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY
7. INSTALL REAR NO. 1 AIR DUCT
8. INSTALL REAR NO. 2 AIR DUCT
9. INSTALL NO. 1 CONSOLE BOX DUCT
10. INSTALL NO. 3 CONSOLE BOX DUCT
11. INSTALL NO. 2 CONSOLE BOX DUCT
12. INSTALL FLOOR CARPET BRACKET RH
13. INSTALL FLOOR CARPET BRACKET LH
14. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/o DVD Player)
15. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/ DVD Player)
16. INSTALL ROOM TEMPERATURE SENSOR
17. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY
18. INSTALL PUSH START SWITCH
19. INSTALL NO. 1 INSTRUMENT PANEL MOUNTING BRACKET
20. INSTALL FRONT STEREO COMPONENT SPEAKER ASSEMBLY
21. INSTALL NO. 1 SPEAKER HOLE COVER
22. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY
23. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)
24. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
25. INSTALL FRONT PILLAR GARNISH LH
26. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
27. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)
28. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
29. INSTALL FRONT PILLAR GARNISH RH
30. INSTALL REAR CONSOLE BOX ASSEMBLY
31. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
32. INSTALL CONSOLE BOX CARPET
33. INSTALL CONSOLE BOX POCKET
34. INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System)
35. INSTALL HEATER SEAT SWITCH CONSOLE BASE (w/ Seat Heater System)
36. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
37. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
38. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
39. INSTALL UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE
40. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
41. INSTALL LOWER INSTRUMENT PANEL RH
42. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY
43. INSTALL SIDE INSTRUMENT PANEL RH
44. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
45. INSTALL FRONT DOOR OPENING TRIM COVER RH
46. INSTALL FRONT DOOR SCUFF PLATE RH
47. INSTALL INSTRUMENT PANEL FINISH PANEL END RH
48. INSTALL NO. 1 SWITCH HOLE BASE
49. INSTALL COMBINATION METER ASSEMBLY
50. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
51. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE
52. INSTALL TILT & TELESCOPIC SWITCH
53. INSTALL STEERING COLUMN COVER
54. ADJUST SPIRAL CABLE SUB-ASSEMBLY
55. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
56. INSTALL INSTRUMENT PANEL FINISH PANEL END LH
57. INSTALL SIDE INSTRUMENT PANEL LH
58. INSTALL FRONT DOOR OPENING TRIM COVER LH
59. INSTALL FRONT DOOR SCUFF PLATE LH
60. INSTALL STEERING WHEEL ASSEMBLY
61. INSTALL STEERING PAD
62. INSTALL LOWER NO. 3 STEERING WHEEL COVER
63. INSTALL LOWER NO. 2 STEERING WHEEL COVER
64. INSTALL HEATER INLET WATER HOSE
65. INSTALL HEATER OUTLET WATER HOSE
66. INSTALL AIR CONDITIONER TUBE AND ACCESSORY
67. INSTALL SUCTION HOSE SUB-ASSEMBLY
68. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
69. INSTALL FRONT FENDER TO COWL SIDE SEAL RH
70. INSTALL FRONT FENDER TO COWL SIDE SEAL LH
71. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
72. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH
73. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH
74. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
75. INSPECT STEERING PAD
76. INSPECT FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

77. INSPECT SRS WARNING LIGHT
a. Inspect the SRS warning light.

78. PERFORM INITIALIZATION

NOTE: Some systems need initialization after reconnecting the negative battery terminal.

79. ADD ENGINE COOLANT
80. CHECK FOR ENGINE COOLANT LEAKS
81. CHARGE WITH REFRIGERANT
82. WARM UP COMPRESSOR
83. CHECK FOR REFRIGERANT LEAKS
84. INSTALL ENGINE ROOM SIDE COVER RH
85. INSTALL ENGINE ROOM SIDE COVER LH
86. INSTALL HOOD HINGE COVER (for RH Side)
87. INSTALL HOOD HINGE COVER (for LH Side)
88. INSTALL COOL AIR INTAKE DUCT SEAL