Brake Warning Indicator: Service and Repair

Skid Control Buzzer:

REMOVAL

1. PRECAUTION
Observe Restraint System; Service Precautions.
2. REMOVE SHIFT LEVER KNOB
3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY WITH FRONT ASH RECEPTACLE
4. REMOVE INSTRUMENT PANEL FINISH END PANEL LH
5. REMOVE INSTRUMENT PANEL FINISH END PANEL RH
6. REMOVE CONSOLE POCKET
7. REMOVE CONSOLE BOX CARPET
8. REMOVE CONSOLE REAR END PANEL SUBASSEMBLY
9. REMOVE REAR CONSOLE BOX ASSEMBLY
10. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
11. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
12. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
13. REMOVE SKID CONTROL BUZZER

a. Disconnect the skid control buzzer connector.
b. Remove the clip and skid control buzzer assembly.

INSTALLATION

1. INSTALL SKID CONTROL BUZZER

a. Attach the clip and install the skid control buzzer.
b. Connect the skid control buzzer assembly connector.

2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
4. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
5. INSTALL REAR CONSOLE BOX ASSEMBLY
6. INSTALL CONSOLE PANEL SUB-ASSEMBLY
7. INSTALL CONSOLE BOX CARPET
8. INSTALL CONSOLE POCKET
9. INSTALL INSTRUMENT PANEL FINISH END PANEL RH
10. INSTALL INSTRUMENT PANEL FINISH END PANEL LH
11. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY WITH FRONT ASH RECEPTACLE
12. INSTALL SHIFT LEVER KNOB