Instruments - Maintenance Lamp Reset Procedure

PRODUCT GENERAL INFORMATION
PG004-06

Title:
RESETTING MAINTENANCE LIGHT
AFTER OIL CHANGE

Models:
'07 ES 350

August 8, 2006

Introduction

After performing an oil change, follow the procedure outlined below to reset the maintenance light.

Applicable Vehicles

^ 2007 model year ES 350 vehicles.

Reset Procedure

1. Press the engine switch to the "IG-ON" mode and make sure that the odometer is set to "TRIP A".

2. Press the engine switch to OFF.

3. While pushing the "TRIP" meter reset knob, press the engine switch to "IG-ON" mode.





4. With the engine switch in the "IG-ON" mode, keep holding the "TRIP" meter reset knob (for at least 5 seconds) with the LCD counting down as shown in the illustration. Release the "TRIP" meter reset knob when the reset is complete.

When the reset is complete, the display will show "000000" for 1 second. Then the odometer will be displayed.





Warranty Information