Canister Purge Control Valve: Service and Repair

Vacuum Switching Valve:

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE NO. 1 VACUUM SWITCHING VALVE




a. Disconnect the 2 vacuum hoses and No. 1 vacuum switching valve connector.




b. Remove the bolt and No. 1 vacuum switching valve.

INSTALLATION

1. INSTALL NO. 1 VACUUM SWITCHING VALVE




a. Install the No. 1 vacuum switching valve with the bolt.

Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)




b. Disconnect the 2 vacuum hoses and No. 1 vacuum switching valve connector.

2. INSTALL V-BANK COVER SUB-ASSEMBLY