Child Restraint Seat Tether Anchor

Child Restraint Seat Tether Anchor:

CHILD RESTRAINT SEAT TETHER ANCHOR

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (W/ Rear Seat Side Airbag)

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

2. REMOVE REAR SEAT CUSHION ASSEMBLY
3. REMOVE REAR SEAT HEADREST ASSEMBLY
4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
5. REMOVE REAR SEATBACK ASSEMBLY
6. REMOVE REAR DOOR SCUFF PLATE LH
7. REMOVE REAR DOOR SCUFF PLATE RH
8. REMOVE REAR SEAT SIDE GARNISH LH (W/o Rear Seat Side Airbag)
9. REMOVE REAR SEAT SIDE GARNISH RH (W/o Rear Seat Side Airbag)
10. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH (W/ Rear Seat Side Airbag)
11. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY RH (W/ Rear Seat Side Airbag)

HINT: Use the same procedure for the RH side and LH side.

12. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH
13. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH
14. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH
15. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH
16. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
17. REMOVE REAR SEAT SHOULDER BELT HOLE COVER
18. REMOVE CENTER STOP LIGHT SET (W/o Rear Sunshade)
19. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (W/o Rear Sunshade)
20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (W/ Rear Sunshade)
21. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

a. Remove the 3 bolts and the 3 child restraint seat tether anchor brackets.

INSTALLATION

1. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

a. Install the 3 child restraint seat tether anchor brackets with the 3 bolts.

Torque: 21 N.m (214 kgf.cm, 16 ft.lbf)

2. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (W/o Rear Sunshade).
3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (W/ Rear Sunshade)
4. INSTALL CENTER STOP LIGHT SET (W/o Rear Sunshade)
5. INSTALL REAR SEAT SHOULDER BELT HOLE COVER )
6. CONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
7. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH
8. CONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH
9. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY LH
10. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY RH
11. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY LH (W/ Rear Seat Side Airbag)
12. INSTALL REAR SEAT SIDE AIRBAG ASSEMBLY RH (W/ Rear Seat Side Airbag)

HINT: Use the same procedure for the RH side and LH side

13. INSTALL REAR SEAT SIDE GARNISH LH (W/o Rear Seat Side Airbag)
14. INSTALL REAR SEAT SIDE GARNISH RH (W/o Rear Seat Side Airbag)
15. INSTALL REAR DOOR SCUFF PLATE LH
16. INSTALL REAR DOOR SCUFF PLATE RH
17. INSTALL REAR SEATBACK ASSEMBLY
18. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
19. INSTALL REAR SEAT HEADREST ASSEMBLY
20. INSTALL REAR SEAT CUSHION ASSEMBLY
21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (W/ Rear Seat Side Airbag)
22. PERFORM INITIALIZATION (W/ Rear Seat Side Airbag)

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal).

23. INSPECT SRS WARNING LIGHT (W/ Rear Seat Side Airbag)