Shift Solenoid Valve

SHIFT SOLENOID VALVE

COMPONENTS (Part 1):

COMPONENTS (Part 2):

REMOVAL
1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY
3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY
4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

DISASSEMBLY

1. REMOVE TRANSMISSION WIRE
(a) Disconnect the connector from the transmission wire.
(b) Remove the bolt and lock plate from the valve body assembly.

2. REMOVE ATF TEMPERATURE SENSOR ASSEMBLY
(a) Remove the 4 bolts, ATF temperature sensor assembly and clamp from the valve body assembly.

(b) Remove the O-ring from the ATF temperature sensor assembly. O-ring

3. REMOVE SHIFT SOLENOID VALVE SL
(a) Remove the shift solenoid valve SL from the valve body assembly.

4. REMOVE SHIFT SOLENOID VALVE SLT
(a) Remove the lock plate and shift solenoid valve SLT from the valve body assembly

5. REMOVE SHIFT SOLENOID VALVE SLU
(a) Remove the shift solenoid valve SLU from the valve body assembly.

6. REMOVE SHIFT SOLENOID VALVE SL2
(a) Remove the bolt, lock plate and shift solenoid valve SL2 from the valve body assembly.

7. REMOVE SHIFT SOLENOID VALVE SL1
(a) Remove the shift solenoid valve SL1 from the valve body assembly.

8. REMOVE SHIFT SOLENOID VALVE SL3
(a) Remove the bolt, lock plate and shift solenoid valve SL3 from the valve body assembly.

9. REMOVE SHIFT SOLENOID VALVE SL4
(a) Remove the bolt, lock plate and shift solenoid valve SL4 from the valve body assembly.

INSPECTION

1. INSPECT SHIFT SOLENOID VALVE SL
(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

If the value is not as specified, replace the shift solenoid valve.

(b) Connect the positive (+) lead to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.
OK: The solenoid makes an operating noise.

If the operation is not as specified, replace the shift solenoid valve.

Shift Solenoid Valve SLT:

2. INSPECT SHIFT SOLENOID VALVE SLT
(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

If the value is not as specified, replace the shift solenoid valve.

(b) Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.
OK: The solenoid makes an operating noise.

If the operation is not as specified, replace the shift solenoid valve.

Shift Solenoid Valve SLU:

3. INSPECT SHIFT SOLENOID VALVE SLU
(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

If the value is not as specified, replace the shift solenoid valve.
(b) Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.
OK: The solenoid makes an operating noise.

If the operation is not as specified, replace the shift solenoid valve.

Shift Solenoid SL2:

4. INSPECT SHIFT SOLENOID VALVE SL2
(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

If the value is not as specified, replace the shift solenoid valve.
(b) Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.
OK: The solenoid makes an operating noise.

If the operation is not as specified, replace the shift solenoid valve.

Shift Solenoid SL1:

5. INSPECT SHIFT SOLENOID VALVE SL1
(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

If the value is not as specified, replace the shift solenoid valve.
(b) Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.
OK: The solenoid makes an operating noise.

If the operation is not as specified, replace the shift solenoid valve.

Shift Solenoid SL3:

6. INSPECT SHIFT SOLENOID VALVE SL3
(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

If the value is not as specified, replace the shift solenoid valve.
(b) Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.
OK: The solenoid makes an operating noise.

If the operation is not as specified, replace the shift solenoid valve.

Shift Solenoid SL3:

7. INSPECT SHIFT SOLENOID VALVE SL4
(a) Measure the resistance according to the value(s) in the table below.

Standard resistance:

If the value is not as specified, replace the shift solenoid valve.
(b) Connect the positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector, then check the movement of the shift solenoid valve.
OK: The solenoid makes an operating noise.

If the operation is not as specified, replace the shift solenoid valve.

REASSEMBLY

1. INSTALL SHIFT SOLENOID VALVE SL4
(a) Coat the shift solenoid valve SL4 and bolt with ATF.
(b) Install the shift solenoid valve SL4 and lock plate to the valve body assembly with the bolt.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)

2. INSTALL SHIFT SOLENOID VALVE SL3
(a) Coat the shift solenoid valve SL3 and bolt with ATF.
(b) Install the shift solenoid valve SL3 and lock plate to the valve body assembly with the bolt.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)

3. INSTALL SHIFT SOLENOID VALVE SL1
(a) Coat the shift solenoid valve SL1 with ATF.
(b) Install the shift solenoid valve SL1 to the valve body assembly.

4. INSTALL SHIFT SOLENOID VALVE SL2
(a) Coat the shift solenoid valve SL2 and bolt with ATF.
(b) Install the shift solenoid valve SL2 and lock plate to the valve body assembly with the bolt.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)

5. INSTALL SHIFT SOLENOID VALVE SLU
(a) Coat the shift solenoid valve SLU with ATF.
(b) Install the shift solenoid valve SLU to the valve body assembly.

6. INSTALL SHIFT SOLENOID VALVE SLT
(a) Coat the shift solenoid valve SLT with ATF.
(b) Install the shift solenoid valve SLT and lock plate to the valve body assembly.

7. INSTALL SHIFT SOLENOID VALVE SL
(a) Coat the shift solenoid valve SL with ATF.
(b) Install the shift solenoid valve SL to the valve body assembly.

8. INSTALL ATF TEMPERATURE SENSOR ASSEMBLY
(a) Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.

(b) Coat the 4 bolts with ATF.
(c) Install the ATF temperature sensor assembly and clamp to the valve body assembly with the 4 bolts.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)

9. INSTALL TRANSMISSION WIRE
(a) Connect the 8 connectors to the valve body assembly.

(b) Coat the O-ring with ATF.

(c) Coat the bolt with ATF.
(d) Install the transmission wire and lock plate to the valve body assembly with the bolt.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)

INSTALLATION
1. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
2. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
3. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY
4. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY