Wiring Harness: Service and Repair

TRANSMISSION WIRE

COMPONENTS:

REMOVAL
1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY
2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY
3. REMOVE VALVE BODY OIL STRAINER ASSEMBLY
4. REMOVE TRANSMISSION VALVE BODY ASSEMBLY





5. REMOVE TRANSMISSION WIRE
(a) Disconnect the 9 connectors.
(b) Remove the transmission wire from the clamp.





(c) Remove the bolt, lock plate and transmission wire from the valve body.

INSTALLATION





1. INSTALL TRANSMISSION WIRE
(a) Coat the O-ring with ATF.
(b) Coat the bolt with ATF.





(c) Install the transmission wire and lock plate to the valve body with the bolt.
Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)





(d) Install the transmission wire to the clamp.
(e) Connect the 9 connectors.

2. INSTALL TRANSMISSION VALVE BODY ASSEMBLY
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
4. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY
5. INSTALL AUTOMATIC TRANSAXLE ASSEMBLY